Magic Painter Method

How to Spray Paint A Car?

Painting a car is not as difficult as it sounds, because if you are using the traditional form of spray it can get difficult but if you are using spray painting it is much more easier specially if you are having the right kind of tools as well and that is why it is important to look into the tools which are required for spray painting the car and also, you need to ensure that you are knowing the right procedure to do so as well, so that you are able to get it done the right way as well.


The very first thing which you would need to do is to collect all the resources and keep them handy and some of the things which are needed are multi-purpose knife as well as drill and hacksaw and pump of the bike. In addition to this you would need the inner tube of the bicycle and the spray paint can as well and off course the paint which you need to put on the car.

Building a valve:

The next thing which you need to do is to take the valve off the bicycle inner tube and fit it on the empty bottle to ensure that you are able to build a pressurized spray can and you can do this with the help of any empty bottle.

Filling the paint:

The next thing which you need to do is to fill the paint in the bottle to ensure that you are able to spray it out. Instead of filling the entire bottle with paint, you need to fill only 75% of the bottle and the rest of the air content would actually help you in spraying it out in order to put it on the car.

You can fill the bottle with the help of the funnels and the funnels can be easily made from thick paper which is available in your home. The density of the paint needs to be experiment with so that you are able to come to the right density and under normal circumstances, you need to go for the ratio of 6:1 with respect to pain and water to ensure that it is not highly liquid but at the same time can be sprayed out as well when you are putting pressure on the bottle.

After filling the paint, you have to close the bottle with a spray cover and shake the bottle to ensure that you are able to mix the water content and paint as well.

Pressurizing the bottle:

You have to fill the air from the nozzle valve of the bicycle tube to ensure that the can stays pressurized. You have to increase the pressure slowly and at all points of time you have to ensure that you are measuring the psi and the ideal psi for a normal bottle is around 25psi. When you reach that level you have to stop the pressurization in order to ensure that you are able to bring it to the right pressure.

Once you are able to pressurize it properly you can be sure that you would now be able to spray paint the car quite easily.

So, if you are looking car spray painting tips, this is the way in which you can get it done quite easily.

Magic Painter Method

Copyright 2016 (c) All Rights Reserved

This is the bottom slider area. You can edit this text and also insert any element here. This is a good place if you want to put an opt-in form or a scarcity countdown.